Products

LDH-V2000 (355,Pico)

  • Non-thermal processing
  • Sample Processing Available
  • New
  • EU RoHS
  • CE Compliance

Industrial UV High Power Picosecond Laser

LDH-V2000 (355,Pico)

  • Features
  • Specifications
  • Applications

High speed and high power processing laser for materials such as Ceramics or PTFE.

Main characteristics
High-speed processing and production

In order to achieve high stability and reliability, Spectronix has used its unique technology to combine a fiber laser with a bulk laser. Compared to lasers of the same class, it is simpler and more compact. Using the 20W ultraviolet laser, it can drill and cut difficult-to-process materials such as reinforced glass and ceramics.

Contributing to minimizing downtime

The general mode-locked picosecond laser requires a large amount of running costs for long-term use due to the need to change seed sources once every two or three years.
LDH-V2000 is equipped with a seed source which is a “Gain-switched” method DFB fiber laser and all of the diode pumped fiber lasers are highly reliable single emitter lasers.
Because of this, LDH-V2000 achieved low operating costs for long-term use compared to general laser oscillators.

High pulse energy

Using a DFB laser can create high pulse energy such as 200μJ at 100kHz. LDH-V2000 is perfect for high-speed cutting and drilling.
Because the 355 nm UV picosecond laser is highly light-absorbent, it is able to perform high quality processing on materials that 1064nm or 532nm lasers have difficultly cutting.

Beam Property
Wavelength 355nm
Average Power >20W@100kHz
Repetition Rate 100kHz~1000kHz
Pulse Width <50ps
Beam Diameter 2.0±0.5mm
Beam Divergence <0.5 mrad
Mode Quality M2<1.4
Spatial Mode TEM00
Stability +/- 2%
Liner (Vertical)

*The above information may be updated without notice. Please verify these specifications with Spectronix or the seller before purchasing.

System Configuration
Laser Head W 420 x D 874 x H 170 mm 60kg
Laser Controller W 570 x D 626 x H 1297 mm 140kg
Cooling System Water-cooled
Power Supply Single-phase AC 100 - 240V +/- 10%, 50/60Hz
Power Consumption Max 2.4kW
External Control TTL / Ethernet
Warm-up Time Cold start 60min (typ.) , Warm start 15min (typ.)
Operational Temperature 15 - 35 degrees
Storage Temperature 0 - 50 degrees
Operational and Storage Humidity Levels 10 - 85%RH w/o condensation

*The above information may be updated without notice. Please verify these specifications with Spectronix or the seller before purchasing.

View All Applications
  • Laser micromachining
    • Cutting
    • Repairing
    • Marking
    • Grafting Materials
    • Submicron Processing
    • Scribing
    • Thin Film Ablation
    • Drilling
    • Trimming