Main characteristics

Contributing to the minimization of running costs and downtime

The general mode-locked picosecond lasers require a large amount of running costs for long-term operation.   
LDH-G2510 is equipped with a seed source which is based on a “Gain-switched” method DFB-LD.
Because of this, LDH-G2510 achieved low operating costs for long-term operation compared to general laser oscillators.

High-speed processing and High throughput

LDH-G2510 is able to perform high-quality processing that minimizes thermal damage with a high beam quality of M²<1.3, a pulse width of <15ps, and a pulse energy of >125 μJ at 200kHz. In order to achieve high stability and reliability, our unique technology combines the technology of fiber lasers and bulk amplifiers to create a more compact and simple structure compared to those of other lasers of the same class lasers. With its Green Laser at more than 25W, it is possible to perform high-speed drilling and cutting on brittle materials such as ceramics.

Beam Property

Wavelength	532nm
Average Power	> 25W@200kHz
Repetition Rate	200kHz to 1000kHz
Pulse Width	< 15 ps
Beam Diameter	3 mm +/-0.5mm
Beam Divergence	< 0.4 mrad
Mode Quality	M2<1.3
Spatial Mode	TEM00
	Linear (Vertical)

^∗The above information may be updated without notice. Please verify these specifications with Spectronix or the seller before purchasing.

System Configuration

Laser Head	W518 x D(884) x H170 mm 65 kg
Laser Controller	W430 x D(394) x H192 mm 13 kg
Cooling System	Laser head ( water-cooled ) , controller ( air-cooled )
Power Supply	AC 100 - 240V ± 10%, 50/60Hz
Power Consumption	Max 2.4kW
Warm-up Time	Cold start 60min (typ.) , Warm start 15min (typ.)
Operational Temperature	15 to 30 degrees
Storage Temperature	0 to 50 degrees
Operational and Storage Humidity Levels	10 to 85%

^∗The above information may be updated without notice. Please verify these specifications with Spectronix or the seller before purchasing.